How to Troubleshoot and Fix an Electric Water Heater

Schedule Your Service

 

 

Just how do you feel in relation to How to Troubleshoot and Repair an Electric Water Heater?


What Would Cause My Electric Water Heater to Stop Working?
Many contemporary homes take advantage of an electric water heater for their furnace, because of its convenience as well as ease of use. Nevertheless, just like any other electric home appliances, problems may emerge with its usage, unexpectedly. It can be actually aggravating to awaken to a chilly shower instead of a hot one or having your bathroom with water that isn't hot enough and even too hot. Whatever the case might be, water heater troubles can be fairly stressful. Fortunately, we have actually made a list of feasible services to your hot water heater issues. There are a variety of elements that can trigger most of these issues, maybe a problem with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you shut off the major power supply for security. Whatever the issue is, getting it fixed ought to not posture excessive of a concern if you follow these actions:

 

Examine Your Power Supply:


As fundamental as this might seem, it is extremely essential. Without sufficient power, your hot water heater will not work. So the first thing to do when your water instantly stops working is to verify that it isn't a power trouble. Check if the fuse is blown out or the breaker tripped. If the circuit breaker is the problem, merely turn it on and off once more. Replace any type of busted or damaged fuse. Test the home appliance with power after these adjustments to see if it's now working.

 

Inspect the Burner in the Water Heater:


If it's not a power problem, then attempt checking out your heating element if it is still working. Check each of your burner to be sure the problem isn't with any of them. If any one of them is damaged, change that part and then inspect whether the warm water is back on.

 

Examine Your Thermostat:


If your hot water heater still isn't working or the water coming out isn't hot enough, you might require to examine the temperature level settings on your upper thermostat. Guarantee the circuit breaker is turned off prior to doing anything. Open up the accessibility panel and also press the red button for temperature reset above the thermostat. This ought to assist heat up the water. Transform the breaker back on and also examine if the trouble has actually been resolved.

 

Call A Professional:


If after replacing all defective parts as well as resetting your temperature, the water heater still isn't working, you may need to get in touch with a professional plumber for an expert viewpoint. The issue with your heating unit could be that the cold and hot faucets have been changed or it may be undersized for the amount of hot water needed in your house. Whatever the situation might be, an expert plumber would assist resolve the problem.

 

Conclusion


Water heater problems are not constantly significant. Most of them are because of minor problems like a blown fuse or damaged burner. Changing the defective parts should do the trick. Nonetheless, if you are still incapable to fix the issue, give a call to your closest plumber to come to get it fixed.

 

8 possible reasons why you have no Hot Water

 

Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.

 

Water Leak

 

Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.


Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.

 

Gas Heater: Gas Leak

 

If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.

 

Gas Heater: Pilot Light Problems

 

There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.


Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.

 

Gas Heater: Faulty Thermocouple

 

The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.

 

Electric Heater: Breaker Blues

 

Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.

 

Electric Heater: Reaching The Limit

 

If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.

 

Electric Heater: Heating Element

 

If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


What Would Cause My Electric Water Heater to Stop Working?

 

I found that content on No Hot Water — Water Heater Repair when doing a search on the search engines. Those who appreciated our page please be sure to pass it around. Thanks a bunch for your time. Please check up our blog back soon.




At This Website
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “How to Troubleshoot and Fix an Electric Water Heater”

Leave a Reply

Gravatar